Specialty Paper Stocklots and Side Reels from Turkey

TurkPaper provides a B2B sourcing and export-coordination route for converters and industrial paper buyers looking for commercially usable stocklots, off-width parent reels, side reels or irregular lots. The page is for requirements where width, reel length, grade or lot size does not fit a routine order—not standard full-container prime tissue or kraft supply. For regular production and standard grades, use Standard product and production enquiries.

A buyer can submit a defined grade and converting use for review. The process may include approaching relevant mills, converters or traders after the brief is qualified, then comparing lot information, photos, samples and shipment feasibility. The page does not advertise a current stock list: availability, origin, usable quantity and specification must be established for each proposal.

When This Sourcing Route Applies

Use this route when the required input is a small or irregular quantity, off-width reel, converter side reel, unsold lot or material with a disclosed deviation that the buyer can evaluate. It is useful when a converting line can use a specific width or short-run quantity, or when the buyer can define acceptable variation in GSM, shade, coating, splice count or defect level. A reel that is too narrow for one converter may still be commercially usable for another, but only the buyer’s actual web path and tolerance can establish that.

The scope includes thermal and label inputs, packaging/converting papers, decor and impregnation grades, filter and absorbent inputs, and insulation or winding materials. It is not a route for waste paper intended for pulping. Food wrapping, tea filtration and sterilisation applications require the buyer to specify the intended use and the documents needed to establish suitability; the material name alone does not establish food-contact or performance compliance.

Procurement Requirements We Review

The examples below are requirements that may be assessed against a converter’s specification. They do not indicate inventory on hand. Give grade, dimensions, tolerances and quantity in terms that describe the minimum usable lot.

Typical sourcing requirements can include paper stocklot reels, side reels and off-width paper reels, kraft liner or testliner stocklots, PE-coated cupstock stocklots, thermal paper jumbo rolls and tissue parent-reel surplus. Buyers should define the grade, GSM, usable width, core diameter, reel diameter, quantity and intended converting route so a proposed lot can be assessed against the actual production requirement.

Thermal, label and release-liner reels

Examples include thermal paper off-width parent reels, silicone release-liner surplus reels and self-adhesive labelstock surplus. For each lot, identify face stock or paper grade, adhesive/liner construction where relevant, GSM, usable width, core diameter and maximum roll diameter. Confirm slit-edge condition, splice limits, winding direction and print or release performance requirements before approving a sample.

Packaging and converting side reels

A buyer may be seeking unprinted cupstock surplus reels, wet-strength kraft stocklot reels, or MG kraft off-width prime reels for a defined converting route. Specify basis weight, moisture range if controlled, reel width, core and maximum diameter, and the converter’s tolerance for edge damage, splice count and shade.

Where the intended use is food wrapping, do not assume suitability from a “food” or “greaseproof” label; ask for the actual lot documentation and intended-use evidence.

Decor and impregnation papers

Decor base paper off-shade reels and melamine decor paper offered with a disclosed off-spec condition are examples for review when the buyer has a controlled shade tolerance or a defined test route. Provide the decor series or intended pressing application, shade target, basis weight, reel dimensions and acceptable colour variation.

A lot sheet, representative photographs and a sample approval step help distinguish a usable colour variation from material that cannot meet the buyer’s production plan.

Filter, absorbent and hygiene converting inputs

Requirements may include off-width filter-paper reels, surplus tea-bag filter paper or narrow-width tissue parent reels. Identify porosity, basis weight, width, reel length and any wet-strength or absorbency test needed.

For tea, food, hygiene or sterilisation use, the buyer must define its documentation and validation requirements; this sourcing page does not certify an end use.

Insulation, board and winding materials

Examples include creped insulation-paper stocklots, electrical pressboard offcuts and remnants of paper tube-winding strip. State thickness or GSM, coating, usable width or cut dimensions, moisture/conditioning limits and the quantity needed.

For electrical insulation, provide the applicable electrical and thermal specification rather than relying on the grade name alone.

Information Needed for a Sourcing Review

Provide the exact paper grade and intended converting use, GSM and tolerance, usable width, core diameter, maximum reel diameter, required quantity and minimum acceptable reel length.

Describe coating, colour, splices and defect tolerance, and state packaging and supporting documents needed. If values are not known, enter “Not known” and explain which sample or drawing could resolve them.

For sensitive applications, specify the exact food-contact, tea-filtration, hygiene or insulation evidence that the buyer will review.

Requirement Details for Sourcing Review

Procurement groupIdentification to provideCondition or usable dimensionsDocuments to requestThermal, label and release-liner reelsGrade/construction and converting useGSM, width, core, maximum diameter, splice limitsLot sheet, photos, sample and application-specific evidencePackaging and converting side reelsPaper grade and process routeGSM, width, usable reel length and defect toleranceLot details and food-use documents if applicableDecor and impregnation papersDecor series, shade target and processShade tolerance, GSM and reel dimensionsLot sheet, photos and buyer-approved sampleFilter, absorbent and hygiene converting inputsFilter/absorbent grade and end useBasis weight, width, porosity or absorbency needsSample, test records and application-specific documentsInsulation, board and winding materialsGrade, coating and electrical/industrial useThickness/GSM, usable dimensions and conditioning limitsLot sheet and relevant electrical/thermal evidence

How the Requirement Is Reviewed

First, the paper specification and business need are qualified: the converting process, required grade, minimum usable dimensions, tolerances and quantity.

Once the RFQ is sufficiently detailed, relevant mills, converters or traders may be approached for the specific requirement. Lot sheets, photographs, sample availability, roll condition and documentation are then compared with the buyer’s limits.

The buyer reviews and approves the sample or technical evidence before a commercial decision. Any proposal is considered only after the lot, terms and shipment route can be assessed; an enquiry is not a reservation or an assurance of recurring supply.

Availability, Condition and Documentation

Off-width, side-reel and stocklot descriptions are not standardised proof of usable quality. A lot may contain variable widths, short rolls, splices, shade drift, edge damage or a disclosed grade deviation.

Confirm the usable width and length, reel count, net mass, packing condition and actual lot origin before accepting a proposal. Any origin, food-contact, hygiene, sterilisation, insulation or performance document is verified for the specific batch and scope.

Usable converting reels are distinct from pulping scrap, and a paper grade name alone does not guarantee an application outcome.

Frequently Asked Questions

What reel dimensions are needed for a stocklot enquiry?

Provide usable width, core diameter, maximum outside diameter, reel length or mass per reel, and the total required quantity. Also state GSM tolerance, winding or splice limits and the minimum roll length your line can use. “Not known” is acceptable where a measurement needs confirmation.

Can side reels or irregular widths be considered?

Yes, if you define the minimum usable width, acceptable length, edge condition and variation your converting equipment can tolerate. Share the intended process and any slit plan; a side reel is assessed as a lot, not assumed to suit every line.

Is repeat availability guaranteed for a stocklot?

No. Stocklots and side reels are often finite, and a later lot may differ in quantity, condition, origin or specification. Repeat demand can be recorded, but each subsequent lot requires a new availability and technical review.

How are food-contact and performance documents checked?

The buyer should state the intended use and required document scope. Any document is reviewed against the particular grade, batch and application; a generic paper description does not establish food-contact, sterilisation, filtration or insulation suitability.

Submit Your Paper Lot Requirement

Send the grade, converting use, reel dimensions, acceptable variation and quantity for a qualified sourcing review. Submission does not reserve a lot or confirm availability.

For a general enquiry, use Contact the TurkPaper sourcing desk.

CTA

Submit Your Paper Lot Requirement

Specify the paper grade, converting use, GSM, usable reel dimensions, acceptable variation, quantity and destination for review.